Quality settings for the PVR 250/350 – http://www.freytechnologi es.com/2_papers/HPquality.txt
Quality settings for the PVR 250/350 can be added by modifying the properties file.
You don’t need to specify all of the parameters for the quality setting; below is the list of the available parameters, their possible values, and their defaults. These are not case sensitive.
QualityName – is the name that will show up in SageRecorder for the Record quality option. Don’t use any spaces or non-alphanumeric characters for the name unless you understand using backslash to do escape sequences.
audiooutputmode – 0 for stereo, 1 for joint, 2 for dual, and 3 for mono. stereo is the default
audiocrc – 0 for off, 1 for on. off is the default
gopsize – 15 and 6 are valid. 15 is the default
videobitrate – in bits/second. 4000000 is the default (4 Mbps)
inversetelecine – 0 is off, 1 is on. default is off
closedgop – 0 is off, 1 is on. default is off
vbr – 0 is off, 1 is on. default is off
outputstreamtype – 0 for Program Stream, 2 for MPEG1 stream, 10 for DVD compliant stream, 11 for VCD compliant stream. Program Stream is the default
width – 720, 480 or 352. 720 is the default (NOTE valid widthxheight combos are 720×480, 480×480, 352×480 and 35×240)
height – 240 or 480. 480 is the default
audiobitrate – in kilobits/second 192, 224, 256, 320, 384. default is 384
audiosampling – 32000, 44100, 48000. default is 48000
peakvideobitrate – in bits/second. This max bitrate when using VBR mode make the videobitrate 1.5x lower see the examples.
